dmesg - Intel Core 2 6400
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE-p12 #0: Tue Nov 4 05:07:17 UTC 2014
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
module_register: module ti_mmchs/mmc already exists!
Module ti_mmchs/mmc failed to register: 17
module_register: module at91_mci/mmc already exists!
Module at91_mci/mmc failed to register: 17
module_register: module sdhci_pci/mmc already exists!
Module sdhci_pci/mmc failed to register: 17
module_register: module sdhci_bcm/mmc already exists!
Module sdhci_bcm/mmc failed to register: 17
module_register: module sdhci_fdt/mmc already exists!
Module sdhci_fdt/mmc failed to register: 17
module_register: module sdhci_ti/mmc already exists!
Module sdhci_ti/mmc failed to register: 17
module_register: module mmc/mmcsd already exists!
Module mmc/mmcsd failed to register: 17
CPU: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz (2130.59-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Family = 0x6 Model = 0xf Stepping = 6
Features=0xbfebfbff
Features2=0xe3bd
AMD Features=0x20100800
AMD Features2=0x1
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4085743616 (3896 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 irqs 0-23 on motherboard
random: initialized
kbd1 at kbdmux0
acpi0: on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bfde0000 (3) failed
cpu0: on acpi0
ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0xB0, should be 0xAF (20130823/tbprint-233)
cpu1: on acpi0
attimer0: port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
atrtc0: port 0x70-0x73 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: port 0x408-0x40b on acpi0
acpi_button0: on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
pcib1: irq 16 at device 1.0 on pci0
pci1: on pcib1
vgapci0: port 0xdf00-0xdf7f mem 0xfb000000-0xfbffffff,0xc0000000-0xcfffffff,0xde000000-0xdfffffff irq 16 at device 0.0 on pci1
nvidia0: on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: mem 0xfcffc000-0xfcffffff irq 16 at device 0.1 on pci1
hdac1: mem 0xfdff8000-0xfdffbfff irq 16 at device 27.0 on pci0
pcib2: irq 16 at device 28.0 on pci0
pci2: on pcib2
pcib3: irq 16 at device 0.0 on pci2
pci3: on pcib3
pci3: at device 4.0 (no driver attached)
pcib4: irq 17 at device 28.1 on pci0
pci4: on pcib4
re0: port 0xbe00-0xbeff mem 0xfdeff000-0xfdefffff,0xfdef8000-0xfdefbfff irq 17 at device 0.0 on pci4
re0: Using 1 MSI-X message
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00300000
miibus0: on re0
rgephy0: PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 6c:f0:49:d0:f1:fd
uhci0: port 0xff00-0xff1f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: port 0xfe00-0xfe1f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: port 0xfd00-0xfd1f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: port 0xfc00-0xfc1f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: mem 0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib5: at device 30.0 on pci0
pci5: on pcib5
isab0: at device 31.0 on pci0
isa0: on isab0
atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 31.1 on pci0
ata0: at channel 0 on atapci0
atapci1: port 0xf800-0xf807,0xf700-0xf703,0xf600-0xf607,0xf500-0xf503,0xf400-0xf40f irq 19 at device 31.2 on pci0
ata2: at channel 0 on atapci1
ata3: at channel 1 on atapci1
pci0: at device 31.3 (no driver attached)
uart0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: at flags 0x100 on isa0
sc0: VGA
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: at port 0x60,0x64 on isa0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
acpi_perf0: on cpu0
coretemp0: on cpu0
p4tcc0: on cpu0
coretemp1: on cpu1
est1: on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 828082806000828
device_attach: est1 attach returned 6
p4tcc1: on cpu1
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: at cad 0 on hdac0
hdaa0: at nid 1 on hdacc0
pcm0: at nid 5 on hdaa0
hdacc1: at cad 1 on hdac0
hdaa1: at nid 1 on hdacc1
pcm1: at nid 5 on hdaa1
hdacc2: at cad 2 on hdac0
hdaa2: at nid 1 on hdacc2
pcm2: at nid 5 on hdaa2
hdacc3: at cad 3 on hdac0
hdaa3: at nid 1 on hdacc3
pcm3: at nid 5 on hdaa3
hdac1: Command timeout on address 0
hdac1: Command timeout on address 0
hdac1: CODEC is not responding!
hdacc4: at cad 2 on hdac1
hdaa4: at nid 1 on hdacc4
pcm4: at nid 20,22,21,23 and 24,26 on hdaa4
pcm5: at nid 27 and 25 on hdaa4
pcm6: at nid 30 and 31 on hdaa4
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen2.1: at usbus2
uhub0: on usbus2
ugen1.1: at usbus1
uhub1: on usbus1
ugen0.1: at usbus0
uhub2: on usbus0
ugen4.1: at usbus4
uhub3: on usbus4
ugen3.1: at usbus3
uhub4: on usbus3
ata0: timeout waiting for read DRQ
(aprobe0:ata0:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata0:0:1:0): CAM status: CCB request completed with an error
(aprobe0:ata0:0:1:0): Retrying command
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen3.2: at usbus3
ukbd0: on usbus3
kbd2 at ukbd0
(aprobe0:ata0:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata0:0:1:0): CAM status: Command timeout
(aprobe0:ata0:0:1:0): Error 5, Retries exhausted
ata0: timeout waiting for read DRQ
(aprobe0:ata0:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata0:0:1:0): CAM status: CCB request completed with an error
(aprobe0:ata0:0:1:0): Retrying command
ata0: timeout waiting for read DRQ
(aprobe0:ata0:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata0:0:1:0): CAM status: CCB request completed with an error
(aprobe0:ata0:0:1:0): Error 5, Retries exhausted
ada0 at ata2 bus 0 scbus1 target 1 lun 0
ada0: ATA-9 SATA 3.x device
ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1
ada0: Previously was known as ad5
ada1 at ata3 bus 0 scbus2 target 0 lun 0
ada1: ATA-8 SATA 2.x device
ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ata3 bus 0 scbus2 target 1 lun 0
ada2: ATA-9 SATA 3.x device
ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 512bytes)
ada2: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad7
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Netvsc initializing... SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 2130586736 Hz quality 1000
Trying to mount root from zfs:zroot/ROOT/default []...
ums0: on usbus3
ums0: 5 buttons and [XYZT] coordinates ID=26
ums0: 0 buttons and [T] coordinates ID=0
uhid0: on usbus3
WARNING: /usr/home/juho/.wine-pipelight was not properly dismounted
WARNING: /usr/home/samuel/.wine-pipelight was not properly dismounted
pid 1138 (mate-power-manager), uid 1001: exited on signal 11 (core dumped)
WARNING: /media/disk was not properly dismounted
linux: pid 1140 (SpiderOak): syscall inotify_init not implemented